With only two ultra fast recovery diode UF4004 with a few capacitors and an oscillator circuit, we can create a DC/DC voltage inverter. DC/DC inverter here, means creating a negative voltage output with the opposite to the source DC voltage.
 |
A fully soldered and tested PCB |
 |
Copper Side |
I use NE555 configured as an oscillator to create a square wave, pulsing the negative voltage inverter circuit.
 |
Some NE555 in my components stock |
 |
Device pin diagram from the Vendor TI |
The IC supplied with the voltage of +12 V. The negative voltage output created by the negative voltage inverter is nearly the same in magnitude of the source voltage but it's different in polarity.
 |
Schematic |
Just like an electronics hobbyist, I did this stuff from scratch with any calculation. It excepts the circuit design, simulation and PCB design.
 |
Circuit Simulation. The output square wave from the oscillator is 30.25 uS period. The amplitude of the signal is 5.50 V. The output negative voltage fail steadily to -12 V DC. |
 |
Copper Side |
 |
Top Silk |
 |
A Sample 3D Design
|
 |
A Sample 3D Model |
Design file could be download here.
No comments:
Post a Comment